Joe
Can you use Prusa's software with other printers
Sat Jan 08, 2022 8:31pm
208.175.138.171

I know regardless I have to re do it in gdrem format for my printer to take it. Which is kinda annoying but whatever. So if it can save the STL with the supports already drawn in I guess that would work?

    • PrusaSlicer makes support removal easy. - Puckdropper, Sat Jan 08 2022 9:09am
      Sometimes the best thing to do is rotate the support about 5 degrees. It doesn't need to be more, I tried 10 and 15 degrees and was just wasting filament. You'd also be surprised sometimes what will print without supports. I don't know if Cura supports angled supports. In PrusaSlicer you do have... more
  • Click here to receive daily updates
    "Forces act when not restrained" - Puckdropper